beepglitch


Drone machine@unearthed circuits by beepglitch
September 7, 2009, 5:23 pm
Filed under: General | Tags: , , ,

Lets start for taking a brief info on the drone machine.

“The Drone Machine is a 4 oscillator noise maker that is controlled by a joystick.  I’ve had this basic circuit built for a while and I’ve been working on finding a type of housing and control mechanism that would make if fun and useful.  The joystick, along with a couple other additions has made this one of my favorites.”

The drone machine looks and sounds really nice and fat, the case design its brilliant with the joystick. But at unearthed circuits there’s also more things to see. This Bitcrusher is really nice, and the Photo trans-activator its simply a strange looking machine. To resume there’s a lot of stuff going at unearthed circuit, music, projects and lots of good ideas.

Unearthed circuits



Sticky Light by beepglitch
August 23, 2009, 9:03 pm
Filed under: General | Tags: , , ,

Concept

A laser spot bounces on a figure being drawn on paper, trying to escape the labyrinth of lines. There is no camera nor projector; this is an experience where the audience can touch and interact with a beam of pure light – and even play a pong game with bare hands. The quality of the laser light, and the fluidity of the motion makes for a very unique experience.

The problem of tracking hands and fingers on natural scenes has received much attention using passive acquisition vision systems and computationally intense image processing. We are currently studying a simple active tracking system using a laser diode (visible or invisible light), steering mirrors, and a single non-imaging photodetector. The system is capable of acquiring three dimensional coordinates in real time without the need of any image processing at all. Essentially, it is a smart rangefinder scanner that instead of continuously scanning over the full field of view, restricts its scanning are to a very narrow window precisely the size of the target.

Sticky light

Smart Laser Tracking



Beepglitch Features in Refunct 2009 by beepglitch
August 20, 2009, 3:28 pm
Filed under: General | Tags: , , , ,

Beepglitch is proud to be associated with Refunct 2009

The ReFunct 09 Symposium is pleased to be associated with some of the main blogs / websites in the field of circuit bending and hardware hacking. We’ve invited each guest blog to present themselves and give their views on the subject.

Refunct 2009



Drum Pads by beepglitch
August 3, 2009, 4:24 pm
Filed under: General | Tags: , , , ,

drumpads2drumpads1

Hey.

Four drum pads ready to go.

All made of old material found in the Alt/Lab installations, and a very special big thankxxx for Mónica who brought the casings (we are going back to that in a moment) for the drum pads.

So the idea was to make drum pads that we could hook up to a sound card(or whatever) and them make sweet music, this is a very nice combination between piezoelectric components and a few layers of some absorbent sound  material like rubber or cork foil (that’s what we use because there was nothing more) and a piece of aluminum foil for a greater drum area .

We use an old can (20l) of paint, four piezoelectric found in electronic junk like old modems and old telephones, wire for connecting the piezos, cork foil for insulation the drum pad area and Mónica supply the casings (square rubber cd´s stands), and glue for putting everything nice and tight .

First we cut a piece of the can (circular about 10cm radius)and we glued the piezo into it, then we drilled one hole into the rubber casing for the wires to came out, them we cut two square cork foil parts (the first in the bottom of the casing and the other for the top) a bit of glue and that’s it drum pads ready to rock.

Now we got some audio coming out of the pads but thats just boring because its always the same and we want to go further like transforming audio into midi messages, and we found the right tool for it, its called  “KTDrumTrigger” and he transforms the audio signal into midi notes, we can use this midi notes inside a sequencer program to control any kind of instrument (either VSTI or some other stuff), in our case we use the drum pads to control “Battery” and thats it instant fun.

There are some other links and some other ideas for drum pads. This “one“uses ardunio as a source for the imput signal.



New Beepglitch by beepglitch
August 1, 2009, 5:17 pm
Filed under: General | Tags: , , , , ,

cropped-beepglitch-wordpress.jpg

Some things just takes time, this is certainly one of that cases

I try ed to put the website up, but unfortunately i have  limited resources in the php and web development and also  limited time, so i try ed my best but was enought. I came up with some other resolution because we were getting tons of traffic in the old blog, so i decided the wordpress solution.

New layout and a bunch of new things including interviews and a small store for some electronic devices, also for those who are interested in circuit bending d.i.y etc in Lisbon area there’s a new space its called Alt/Lab and its open to new people and new ideas.

For now thats it hope you all enjoy the new blog.